Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 118
Managing profiles, Importing a destination profile
![]() |
View all Konica Minolta AccurioPress C2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
108 Chapter 7-Managing color Message Device not connected Printer not connected Measurement failed Invalid measurement format loaded Wrong chart measured Information and solution Connect the external device. Connect the printer. Repeat the measurement. Make sure that you are loading a measurement file in the correct file format. Repeat the measurement with the correct chart. Managing profiles The Profile Manager enables you to import and manage destination, source, and device link profiles on the IC-314 print controller. Importing a destination profile Import a destination profile to emulate an output device. Requirements: If you save a profile in a location other than the Profile Manager, you must import it before you can print a job using it. Note: After you import the profile, the file format becomes *.icm. 1. From the Tools menu, select Resource Center. 2. In the Resource list, select Profile Manager. 3. Click the Destination Profile tab. 4. Click Import. The Import Destination ICC Profile window appears. 5. In the Destination profile area, click the Browse button. 6. Locate and select the required destination profile, and then click Open. The new destination profile name is displayed in the Destination Name box. 7. (Optional) Change the name of the destination profile. 8. Click Import. 9. Click Close to close the Resource Center. The new destination profile is added to the Destination Profile list on the Color Flow tab in the job parameters window.
![](/manual_guide/products/konica-minolta-accuriopress-c2070-ic314-user-guide-5ef7a9a/118.png)