Konica Minolta AccurioPress C2070 IC-314 User Guide - Page 127
PSO LWC Improved FOGRA45, ISO Coated V2 FOGRA39
View all Konica Minolta AccurioPress C2070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Validation Tool 117 5. In the Reference profile list, select the profile against which you want to validate. You can select from: ○ If you selected Fogra V3.0 as your validation wedge, you can select from: ○ ISO Coated V2 (FOGRA39) (default) ○ PSO Coated (FOGRA51) ○ PSO LWC Improved (FOGRA45) ○ PSO Uncoated (FOGRA47) ○ PSO Uncoated V3 (FOGRA52) ○ If you selected IDEAlliance 2013 as your validation wedge, you can select from: ○ GRACol2006 Coated V2 (default) ○ GRACol2013UNC CRPC3 ○ GRACol2013 CRPC6 ○ SWOP2006 Coated 3 v2 ○ SWOP2013C3 CRPC5 ○ SWOP2013C5 6. In the CMYK rendering intent list, select one of the following: ○ Absolute (default)-Emulates the paper white ○ Relative-Removes the paper white 7. Select G7 based if you want the validation based on G7 compliance. 8. If you selected G7 based proceed as follows: a. In the Destination profile, list select G7_83_73PPM Press or one of the other G7 profiles in the list. b. In the Calibration list, select G7_Normal or one of the other G7 calibrations in the list..