Konica Minolta HP PageWide XL 5000 MFP User Guide

Konica Minolta HP PageWide XL 5000 MFP Manual

Konica Minolta HP PageWide XL 5000 MFP manual content summary:

  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 1
    HP PageWide XL 5000 Printer User guide
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 2
    HP products and services are set forth in the express warranty statement accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall trademarks of Microsoft Corporation. PANTONE® is Pantone, Inc.'s check-standard trademark for color.
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 3
    ...7 Front panel ...8 HP Utility ...12 Embedded Web Server ...12 Turn the printer on and off ...14 Internal prints ...14 Preparing your printer ...15 Accessibility ...24 Other sources of information ...24 2 Paper handling ...25 General information and tips ...26 Supported paper types ...27 Paper
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 4
    items ...67 Link configuration methods ...71 Troubleshooting ...72 5 Sending a job to print ...76 Print from the driver ...77 Print from a USB flash drive 108 9 Maintenance ...110 Check printer status ...111 Clean the exterior of the printer ...111 Move or store the printer ...111 Move or store the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 5
    order ...119 List of accessories ...119 11 When you need help ...120 Request support ...121 Customer Self-Repair ...121 Service information ...121 12 Retrieving printer usage information ...122 Get printer usage and accounting information 123 Get usage information ...123 Get detailed job accounting
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 6
    vi ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 7
    1 Introduction ● Welcome to your printer ● Safety precautions ● Main components ● Front panel ● HP Utility ● Embedded Web Server ● Turn the printer on and off ● Internal prints ● Preparing your printer ● Accessibility ● Other sources of information ENWW 1
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 8
    HP PageWide XL pigment ink for dark blacks, vivid colors, serviceable parts inside the printer except those covered by HP's Customer Self Repair program (see http://www.hp.com/go/selfrepair/). Refer servicing of other parts to qualified service personnel. ● Turn off the printer and call your service
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 9
    . The printer uses one power cord. Unplug the power cord before servicing the printer. To avoid the risk of electric shock: ● The printer must be voltage specified on the nameplate. ● Use only the power cord supplied by HP with the printer. Do not use a damaged power cord. Do not use the power cord
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 10
    handling HP recommends that you wear gloves when handling the ink maintenance cartridge or waste container. Warnings and cautions The following symbols are used in this manual to ensure the proper use of the printer and to prevent the printer from being damaged. Follow the instructions marked with
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 11
    and safety instructions. Crush hazard. Keep hands away from the moving service carriage. This label is located by the access to the service carriage, cleaning container and by the access to the service carriage. Do not use the drawers as stairs: the printer could overbalance. This label is located on
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 12
    the gears while they are moving. This label is located on the high-capacity stacker. NOTE: The final label position and its size on the printer may vary slightly, but labels should always be visible and close to the potential risk area. 6 Chapter 1 Introduction ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 13
    Main components The following front and rear views of the printer illustrate the main components. Front view 1. Print bar 2. Front panel 3. Ink cartridges 4. Paper access front cover 5. Drawer 6. Maintenance cartridge Rear view 1. Output module 2. Paper output 3.
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 14
    is displayed on the front panel's home screen. 2. The front panel itself: an 8 inch, full-color, touch-sensitive screen with a graphical user interface. 3. A loudspeaker. 4. The Power key, with which you can turn the printer on or off, or wake up from sleep mode. The key is illuminated when the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 15
    the bottom of the screen: ● The first main screen provides direct access to the important printer functions, depending on your printer model and accessories. ● The all-app screen displays a list of all apps available in your printer, and the status of each of them. ● The widget screen enables you to
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 16
    . When printing, the yellow light remains at the left, and a white moving light appears. Yellow light The printer can print, but there is something wrong. If the problem persists, contact your support representative. While printing, you will see a yellow instead of a white light. Red light The
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 17
    blinks. To change the time that elapses before sleep mode, see Change system options on page 11. Printer Monitoring (with the Print Spooler) and Remote Printer Management with the HP Utility and Web JetAdmin continue to be available during sleep mode. Some remote management tasks offer the option
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 18
    . Embedded Web Server The Embedded Web Server is a Web server running inside the printer. You can use it to obtain printer information, manage settings and presets, install new firmware, and troubleshoot problems. Service engineers can use it to retrieve internal information that helps to diagnose
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 19
    Embedded Web Server on any computer, open your Web browser and enter the printer's IP address in the browser's address bar. The Embedded Web Server window in your Web browser options. If you specify a language that it cannot support, it functions in English. To change the language, change your Web
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 20
    turn it back on, use the power switch at the rear. When the printer is powered back on, it takes about 3 minutes to initialize and check the print bar. Preparing the print bar takes about 75 seconds. However, if the printer has been off for 2 weeks or more, preparing the print bar could take up to
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 21
    of these estimates is not guaranteed) ◦ HP-GL/2 palette shows the color or grayscale definitions in the currently selected color palette ◦ PostScript font list shows PostScript fonts available (PostScript printers only) ◦ Print folder pattern ● Service information prints ◦ Print current information
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 22
    a working network configuration for most networks. The printer's other settings remain unchanged. Connect a computer to the printer by network (Windows) The following instructions apply if you intend to print from software applications using a printer driver. See Sending a job to print on page
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 23
    The printer does not support AppleTalk. The following instructions apply if you intend to print from software applications using a printer driver. service name of your printer. 2. Insert the HP Start-up Kit DVD into your DVD drive. 3. Open the DVD icon on your desktop. 4. When the Pagewide Printer
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 24
    and troubleshoot the printer's connectivity and start benefitting from connecting your printer. If you are part of the HP Designjet Partner Link Pay-per-use service, remember to go to the Connectivity app and select Printer services > Register new service in order to register the printer service
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 25
    is detected, you will be provided with a description of the problem and some possible solutions. Configure email printing through HP Connected The HP Connected service makes it easy to send jobs to your printer by attaching them to an email message. You must accept the "Connectivity agreement
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 26
    ; you can check manually whenever you like. ● Download: If you select Automatically (the default setting), the printer will automatically download new firmware whenever it becomes available. If you select Manually, you will be asked to approve each download. NOTE: Downloading the firmware does not
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 27
    Printer access control: Enable, disable, or change the administrator password. ● Printing & management Web services: Enable or disable Web services that are used by printing and management tools such as the HP Utility, HP ● Enable or disable automatic downloading and/or installation of automatic
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 28
    hold for accounting". The account ID can be set in the printer driver when sending the job. If the job is set "on hold for accounting" by the printer, you can introduce the account ID in the Embedded Web Server, HP Designjet Utility, HP Utility, or front panel, by going to the job queue and
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 29
    You can find last Windows drivers available at http://www.hp.com/go/PageWideXL/drivers. The Universal driver is recommended if you have a fleet of HP Designjet and PageWide XL printers: it Unfaicvileitartseas ilnWstailnladtioonwansddqruievueemr afnoargefmleenett. Tohfe HdrPiveDr iencsluigdensjHePt
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 30
    system, right-click the printer's icon, select Printer Properties, go to the services accessible to people with disabilities. Other sources of information The following documents can be downloaded from http://www.hp.com/go/pagewidexlseries/support/ manuals/: ● Introductory information ● User's guide
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 31
    2 Paper handling ● General information and tips ● Supported paper types ● Paper status ● Load paper ● Unload paper ● Paper options ● Store paper ● Cannot load paper ● Protect a paper type ● Paper jam ENWW 25
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 32
    photo paper, wear cotton gloves to avoid transferring oils onto the paper. ● Each drawer can be loaded with two paper rolls (front and rear). Your printer has one or two drawers: the second may be purchased as an accessory. The roll positions are numbered 1 and 2 in the top drawer, 3 and 4 in
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 33
    paper types The following paper types are compatible with your printer. Supported HP papers Name Plain paper HP Universal Bond Paper, 3-in core HP Bright White Inkjet Paper, 3-in core HP Premium Bond Paper, 3-in core Coated paper HP Universal Heavyweight Coated Paper, 3-in core Poster paper
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 34
    Satin Poster Paper, 3-in core HP Gloss Poster Paper, 3-in core Banner HP Matte Polypropylene, 3-in core Width 36 in (914 mm) L5Q08A L6B19A Other supported paper types Plain papers Plain paper < 90 g/m² Plain paper 90-110 g/m² Plain paper > 110 g/m² Recycled Colored paper Technical papers
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 35
    Blueprint ● Blueprint Paper status The paper source displays the drawers in your printer, and one of the following status messages for each roll: ● Low app to access the paper menu, then press Load. TIP: If the printer is not printing and the lock light on the drawer is off, you can skip this
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 36
    2. Open the drawer. WARNING! Do not stand on the drawer: the printer could fall over. TIP: You can load more than one roll at the same time. TIP: Load heavier rolls in upper drawers; they can weigh
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 37
    5. Place the roll into the drawer between the hubs, with the paper edge as shown. Do not load the roll at an angle, like this: 6. Slide the hubs back towards the center so that they engage with the roll. 7. Ensure that the hubs are fitted tightly to the roll on both sides. ENWW Load paper 31
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 38
    8. Important: Close the locking levers on the left and right hubs. 9. Feed the paper into the appropriate slot: the front slot for the front roll, the rear slot for the rear roll. TIP: The rear roll may need extra roll-ups to facilitate automatic feeding. Do not stop feeding until the paper is
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 39
    that helps. 14. When you are ready, press Finish and check. The printer checks the position, width, and length of the loaded paper. The width and then executes Finish and check automatically. Unload paper 1. Ensure that the printer is not printing and that the lock light on the drawer is off. 2.
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 40
    in a humid environment, its width when loaded can vary, and it may even jam in the printer. To avoid this, store this kind of paper in its packaging in humid conditions. Remove it from the printer in conditions of low temperature and high humidity (such as 15°C and 80% relative humidity). If
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 41
    specifications. TIP: When loading rear rolls, you must feed more paper manually (about 40 cm, or 16 in) than with front rolls. Protect a paper just select the paper type explicitly when submitting the job from a printer driver or other job submission software. NOTE: If a protected paper type is
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 42
    Paper jam When the printer detects a jam, it tries to resolve the issue automatically. If it cannot, it stops, and you must fix the problem manually. The front panel starts the paper jam wizard to display where the jam occurs and how to fix it. Clear the paper jam as instructed on each screen of
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 43
    is there already. CAUTION: Take care not to cut yourself when moving the cutter. CAUTION: Do not dismantle the cutter assembly: refer it to qualified service personnel for servicing. ENWW Paper jam 37
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 44
    5. Remove the paper, cutting it manually if necessary. 6. Make sure there are no loose pieces of paper left in the drawer. 7. Close the front cover of the drawer. 8. Rewind the paper. 38 Chapter 2 Paper handling ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 45
    the slot. 11. Use the paper-cut button to cut the leading edge again. 12. Close the drawer. 13. Wait until the printer is ready for paper. 14. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 46
    purpose, not a single blade. 4. Make sure there are no loose pieces of paper left. 5. Close the front cover. 6. Wait until the printer is ready for paper. 7. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 47
    3. Push the button to raise the output module. 4. Pull out the paper. CAUTION: Be careful not to touch the pinchwheels: they are sharp and can cut your fingers. 5. Make sure there are no loose pieces of paper left. ENWW Paper jam 41
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 48
    6. Close the output module. 7. Wait until the printer is ready for paper. 8. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed. Paper jam in
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 49
    3. Open the stacker. 4. Pull out the paper. 5. Close the rear cover. 6. Close the stacker. 7. Wait until the printer is ready for paper. 8. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed. ENWW Paper
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 50
    input 1. Open the fan-fold cover to stop the folder motor and cut the power supply to it. 2. If necessary, cut the paper between the printer and the tray. 3. Remove the paper from the no-fold tray. 4. Unlatch and lift the folder input. 5. Pull out the paper from the tray. 6. Push
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 51
    been printed. Paper jam in the no-fold tray IMPORTANT: This operation must be performed by a service engineer or by someone else with appropriate training. 1. Open the top cover of the tray. 2. Cut the paper between the printer and the folder, if necessary. 3. Remove the paper. ENWW Paper jam 45
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 52
    Remove any remaining pieces of paper. 4. Close the cover. 5. Ensure that the metal pieces remain on the cover. 6. Wait until the printer is ready for paper. 7. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 53
    path 1. Open the cross-folding cover. 2. Remove the paper. CAUTION: Take care to avoid injury. 3. Close the cover. 4. Wait until the printer is ready for paper. 5. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 54
    the high-capacity stacker. You can pull the stacker by the beam at the rear of the tray. 3. Cut the paper between the printer and the high-capacity stacker, if necessary. 4. Remove the paper from the high-capacity stacker. 5. Remove the paper from the printer. 48 Chapter 2 Paper handling ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 55
    6. Close the output module. 7. Reconnect the high-capacity stacker. 8. Wait until the printer is ready for paper. 9. The printer resumes the job and automatically reprints any lost pages. However, you should check that all pages of the job have been printed. ENWW Paper jam 49
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 56
    3 Ink system ● Ink cartridges ● Print bar ● Cleaning container ● Maintenance cartridge ● Safe mode 50 Chapter 3 Ink system ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 57
    each color is used at a time, the other is inactive until needed, and can be replaced while printing continues. Below each ink cartridge, the printer cartridge is not responding, but removing and reinserting it may solve the problem. ● Replace: The cartridge has been identified as faulty. It should
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 58
    Ink cartridge part numbers PageWide Printer 400 ml C1Q57A C1Q58A C1Q59A C1Q60A C1Q61A C1Q62A C1Q63A C1Q64A C1Q65A C1Q66A C1Q67A C1Q68A F9J82A F9J83A F9J84A F9J85A HP 843A 400-ml Black Ink Cartridge HP 843A 400-ml Cyan Ink Cartridge HP 843A 400-ml Magenta Ink Cartridge HP 843A 400-ml Yellow Ink
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 59
    cartridge and push it in as far as it will go. 5. Follow the instructions in the front panel. 6. When you have replaced all cartridges that you want cartridge runs out of ink, the printer will automatically try to switch to the other cartridge of the same color, after which you can replace the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 60
    troubleshooting 1. Check that you have the correct type of cartridge (model number). 2. Check that the cartridge label is the same color intervals, and automatically serviced when necessary. This printer's paper-loading system includes an auto-indexing facility: whenever paper is loaded, the printer
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 61
    number The HP 841 printhead has the part number C1Q19A. Replace printheads Printheads rarely need to be replaced, but the front panel will tell you when a printhead is failing or has reached the end of its life. Alternatively, a test print may indicate a printhead problem before the printer detects
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 62
    one of the main hazards to electronics products. This type of damage can reduce the life expectancy of the device. IMPORTANT: Recalibrate the printer after any printhead replacement (see Calibrate print bar on page 106). Make sure you have the right paper for the calibration loaded before replacing
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 63
    7. Identify the printhead(s) that you want to replace. NOTE: You can replace more than one printhead at a time. 8. Pull up the printhead handle. 9. Lift the latch. ENWW Print bar 57
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 64
    10. Extract the printhead carefully. IMPORTANT: Printheads are fragile. Leave the printhead oriented as shown below, if you intend to use it again later. Never touch the nozzles, which could damage them. If you remove multiple printheads and intend to use them later, make sure to keep them in the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 65
    Printhead maintenance The printer and the maintenance cartridge clean the printheads automatically. Avoid removing printheads unnecessarily. Printhead troubleshooting 1. Check that the printhead cover. 5. If you still have problems when printing, see Print quality on page 104. ENWW Print bar 59
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 66
    container is not detected. ● Almost full: This is estimated by the printer. ● Full: The printer has stopped printing. It will continue after the cleaning container has been replaced. Cleaning container part number The HP 841 cleaning container has the part number F9J47A. Replace the cleaning
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 67
    disposing of ink system consumables. Cleaning container troubleshooting If the cleaning container is correctly installed but the printer does not detect it, first try taking it out and putting it back again. If that fails, call your support
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 68
    The printer will refuse to Almost finished ● Finished Maintenance cartridge part number The HP 841 maintenance cartridge has the part number F9J48A. Replace not become dry. If the front panel shows an error, close the service door. 1. Remove the packaging from the new maintenance cartridge. 2. Start
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 69
    4. To remove the maintenance cartridge, grip the handle and slide it out. 5. If you intend to insert a partially used replacement cartridge, make a note of the percentage of cloth remaining, which is shown approximately on the side of the cartridge. You will be asked for this figure later. ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 70
    need replacing. Maintenance cartridge troubleshooting If the printer does not detect the maintenance cartridge that you have inserted, open the door and make sure the maintenance cartridge is correctly inserted. If this does not solve the problem, contact your support representative. Safe mode Under
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 71
    , performance, durability, and value-with every print. NOTE: This printer is not designed to use continuous ink systems. To resume printing, remove the continuous ink system and install genuine HP (or compatible) cartridges. NOTE: This printer is designed for ink cartridges to be used until they are
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 72
    4 Networking ● Introduction ● Control network protocols ● Front-panel menu items ● Link configuration methods ● Troubleshooting 66 Chapter 4 Networking ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 73
    manually configure the link using the printer's front panel, or through other configuration tools once network communication is established. The printer can support the HP Jetdirect Print Server Administrator's Guide for your print server model. Front-panel menu items To access the printer network
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 74
    to identify the device. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where Manual) Configure parameters directly from the printer control panel: IP Address: The unique IP address of the printer (n.n.n.n). Subnet Mask: The subnet mask for the printer
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 75
    169.254.x.x is set. Legacy: The address 192.0.0.192 is set, consistent with older HP Jetdirect devices. Specify the IP address (n.n.n.n) of a Primary DNS Server. NOTE: This item appears only if Manual configuration is a higher priority than DHCP in the Config. Precedence table, configured through
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 76
    can be up to 255 octets. For some networks, you may need to contact your Independent Service Provider (ISP) for the proxy server address. Type the port number used by the proxy server for client support. The port number identifies the port reserved for proxy activity on your network, and can be
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 77
    . (A 1000T halfduplex selection is not supported.) 10T Half: 10 Mbps, half-duplex Link configuration methods The printer supports 10, 100, or not support auto-negotiation, the printer will 10 Mbps half-duplex. If the printer is not able to connect to the is downloaded, for example, from a
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 78
    lights (LEDs) are providing proper status. See the HP Jetdirect Print Servers Administrator's Guide for your print server model to interpret and troubleshoot other messages. Reset network parameters If you accidentally misconfigured the printer's network settings, they can be reset to factory
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 79
    or switch. For manual configuration methods, see Link configuration methods on page 71. Turn the printer off, then on problem: ● Ensure that you have selected the correct printer when sending your job. ● Ensure that the printer works correctly when printing from other applications. ● If your printer
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 80
    action to resolve the problems. 6. If all else fails, turn the printer off and on again with the power key on the front panel. Cannot access the printer from the HP Utility 1. If you have not done so already, read HP Utility on page 12. 2. Make sure your printer driver is available and working
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 81
    to the form 169.254.x.x . In this point-to-point configuration you can discard any issues caused by other network equipment. ENWW Troubleshooting 75
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 82
    different ways in which you can choose to print, depending on your circumstances and preferences: ● From HP SmartStream: See the HP SmartStream documentation at http://www.hp.com/go/ smartstreampagewidexl/manuals/. ● From a printer driver: Print any kind of file from a computer connected to the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 83
    software. Therefore, we recommend installation using the DVD (or the install package that you can download from HP's website) so that all of the printer software is installed. Check and change main driver settings There are a relatively large number of print settings that you can use when printing
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 84
    saved group of settings is known as a quickset. The printer drivers support any accessories such as a stacker or folder connected to your printer. The printer's default output is also the driver's default output. However, from the driver you can change the output destination and other options such
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 85
    printing feature to specify that a job cannot be printed until you release it from the printer's front panel. To preview it in the Embedded Web Server, you will need to enter or more TIFF, JPEG, HP-GL/2, RTL, PDF, or PostScript files into the printer's USB port. ENWW Print from a USB flash drive 79
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 86
    Select a file to be printed. Multipage documents are supported only in PDF files; in this case, you areas, or High detail. ● Color options allows you to choose color, grayscale, or black-and-white printing save paper. ● Printer margins allows you to change the default printer margins. ● Storage
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 87
    have enabled Web Services, you can print to your printer by email. You can find the printer's email address from the front panel: press , then HP connected. Then is... Recommended print mode You will obtain... Monochrome or color lines and text A Lines/Fast Any content if maximum
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 88
    NOTE: The intention of the Lines/Fast mode is twofold: it can be used for images with only lines and text, or for any kind of image when you need maximum productivity. 82 Chapter 5 Sending a job to print ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 89
    6 Queue management ● Job queue introduction ● Job queue actions ● Job queue options ● Default printing preferences ● Job deletion ENWW 83
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 90
    with printing. Now printing The job is being printed. ● Paused: The job is paused. NOTE: Sometimes, while printing, you may see a Self-servicing status, which means that the printer is performing some task such as paper type change or print mode change between pages of the same job. On hold The
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 91
    loaded, both of which are suitable for the job, the roll is chosen according to your preferences. ● Increase productivity: To increase the productivity of the printer. ENWW Job queue actions 85
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 92
    > Mismatch actions. ● Pause and ask (the most restrictive option): Printing stops until the correct paper is loaded. This option is recommended when the printer is attended. A message appears, asking what you want to do: cancel the job, print anyway, put on hold, or load paper. These options
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 93
    empty for a job that requires it to be empty, size/type/length not supported by that output, or folder is offline. The following options are available in to your printer from remote locations. You can define settings in the following areas: Print quality, Color, Paper, Margins, HP-GL/2, PostScript
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 94
    Job deletion If the printer runs out of storage space for new jobs, the oldest printed jobs on hold allows you to define the time after which these jobs will be removed (2-48 h). To delete a job manually, select the job and press Delete in the footer. To delete all jobs, press Delete all jobs in the
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 95
    7 Collection and finishing If you choose no specific job destination, prints are sent to the default output destination, which can be changed from the front panel. From the home screen, press , then Output destination. ● Top stacker ● High-capacity stacker ● Folder ● Basket ENWW 89
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 96
    Tracing Paper, use the supports attached to the top stacker (not recommended for other paper types). By default, the printer cuts the paper after every and select Top stacker. ● Printer driver: Go to printer properties, delivery output, and select Top stacker. ● HP SmartStream: Go to job properties,
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 97
    coming from the end of a roll. ● Collection required: To avoid problems due to the characteristics of some papers, in some cases you may need on density and weight. It can handle all paper types accepted by the printer. The accessory roof should be horizontal, unless you are printing on natural
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 98
    , and displays the message Output is now detached from printer. Please reposition. You cannot print until the stacker is mechanically reconnected. Folder The HP PageWide XL Folder folds printed sheets of paper, managing the printed sheet from end to end. It supports roll sizes up to 36 in (914 mm
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 99
    Submitting a job to the folder NOTE: While the folder is installed, it is the printer's default output device. If you submit a job without specifying a folding style, the and select the folding style. ● Printer driver: Go to printer properties, delivery output, and select Folder. ENWW Folder 93
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 100
    go to the front panel and press , then Output destination > Printing from driver; from there you can assign one folding style to each predefine. Then, in this in the Layout/Output tab. There are some paper types that are not supported by the folder. You will see a warning if you try to send such
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 101
    ● HP SmartStream: Go to job properties, delivery output, and select Folder. You can select the folding style as one of the print options. You can specify
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 102
    is ready to receive jobs, waiting for jobs, or receiving jobs. ● Full: The cross-fold or no-fold tray has reached its full capacity. The printer finishes the current page, then stops printing. ● Error. In these cases, all jobs are put on hold for output. ◦ Paper jam ◦ Cover open ◦ Folder not
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 103
    Folding styles are usually based on DIN B or DIN C style: DIN B The top and bottom folds are always on opposite sides. If this is what you want, select a folding style below marked with an asterisk, as these are the ones based on DIN B style. All folding styles that include a filing option (tab or
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 104
    ● DIN B 210 × 297 mm TAB* 210 mm width, 297 mm height, with tabs ● DIN C 210 × 297 mm (compact fold) 210 mm width, 297 mm height ● DIN B 210 × 305 mm* 210 mm width, 305 mm height AFNOR For AFNOR style, use DIN format rolls. Jobs should be submitted as A0 portrait, A1 landscape, or A3 landscape. ●
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 105
    ● ANSI 8.5 × 11 in 8.5 in width, 11 in height Fan fold only ● ● Fan fold only (210 mm) Fan fold only 9 in Others ● 185 + 25 × 297 mm (with binding edge) 180 mm width, 25 mm margin, 297 mm height ● ARCH 9 × 12 in 9 in width, 12 in height ● Mailer 7.5 × 10 in 7.5 in width, 10 in height ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 106
    other functionalities available for purchase. For more information, contact your support representative. Tab applicator ● When available, a folding style with tab application can be selected from HP SmartStream, the printer driver, USB flash drive, or Copy. ● During installation or replacement, you
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 107
     A3: 420²297mm A3: 420²297mm Offline folding Offline folding means that you provide the printed sheets to the folder manually: they do not come directly from the printer. The default folding style is used. 1. In the Output menu, press Offline fold. The job queue is automatically paused. 2. Empty
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 108
    the document you are inserting. 5. Go to the job queue and release it. Troubleshooting ● Jams: If a paper jam is detected, the front panel will notify you. your support representative. ● Communication problems: If the printer does not recognize the folder, try to switch off the printer and folder
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 109
    The illustration below shows the basket closed, permitting easier access to the printer (to clear printer jams, for example). NOTE: If the basket is the selected output device, do not try to print with the basket closed. ENWW Basket 103
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 110
    8 Print quality ● General printing advice ● Optimize print quality app ● Print diagnostic plot ● Advanced options ● Enhanced printhead recovery ● Page length accuracy 104 Chapter 8 Print quality ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 111
    problem: ● To achieve the best performance from your printer, use only genuine manufacturer's supplies and accessories, whose reliability and performance have been thoroughly tested to give trouble print-quality problems, you can follow a more hands-on print-quality troubleshooting procedure, by
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 112
    that the selected paper type is the same as the paper loaded into the printer. The print is divided into three parts. The top part is about print-bar and color calibration problems, the center is about alignment problems, and the bottom part is an illustration of the printhead positions that can be
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 113
    calibrate the printer if you are warned that a roll has a calibration pending status. Print-bar calibration includes printhead alignment and color calibration. bar, then Continue. 2. Make sure that you have loaded a roll of HP Production Matte Polypropylene, 40 in (1016 mm) wide, for best results and
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 114
    calibrations to solve particular kinds of problems. Enhanced printhead recovery This procedure degradation, such as multiple nozzles malfunctioning, or color mixing. It may also be used to to correct automatically or manually. If you press Start (recommended), the printer makes an automatic correction
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 115
    IMPORTANT: You could cause a system error or damage to the printer by entering an incorrect error value after Adjust manually. If the above procedures do not solve your problem, call your support representative. ENWW Page length accuracy 109
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 116
    9 Maintenance ● Check printer status ● Clean the exterior of the printer ● Move or store the printer ● Move or store the high-capacity stacker ● Move or store the folder ● Replace the folder's tab reel ● Update the firmware ● Secure File Erase ● Disk Wipe
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 117
    alert to get help in solving the problem. ● From a distance, you can get a quick idea of the printer status by looking at the beacon. See Printer alerts on page 9. Clean the exterior of the printer Clean the outside of the printer and all other parts of the printer that you regularly touch as part
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 118
    printer parts and cartridges and can result in ink leaks and printer errors. In this case, HP recommends that you wait at least 3 hours before turning on the printer doors or corridors, call your support representative. This should be done by trained service personnel. Disconnect the cable before
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 119
    2. Pull the lower lever. 3. Rotate the tab protector to remove it. 4. Remove the empty tabs. ENWW Replace the folder's tab reel 113
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 120
    5. Place the new tab reel. 6. Put back the tab protector. 7. Pull the upper lever. 8. Open the two parts as shown so that you can pass the tab reel. 114 Chapter 9 Maintenance ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 121
    9. Pass the tab reel by the path shown in the image. 10. Close the two parts that you opened in step 8. 11. Push back the two levers. 12. Close the door. ENWW Replace the folder's tab reel 115
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 122
    manual updates. NOTE: The firmware includes a set of the most commonly used paper presets. Extra paper presets can be downloaded separately. Automatic firmware updates Automatic firmware updates are a convenience that is possible with HP-connected printers. Your printer can automatically download
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 123
    drive. Download the firmware file from http://www.hp.com/go/pagewidexlseries/ support/firmware/ (according to your printer model) into the USB flash drive and insert it into the HiSpeed USB host port in the front panel. A firmware update assistant will appear on the front panel to guide you through
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 124
    or the Embedded Web Server (Setup > Security). NOTE: If you choose to erase the whole hard disk, you may be asked to restart the printer several times during the process, which will take about 6 hours with Secure Fast Erase or 24 hours with Secure Sanitizing Erase. 118 Chapter 9 Maintenance
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 125
    , and the printer is upgraded forever. ● HP PageWide Folder (K5H75A) ● HP PageWide XL Folder with Tab Applicator (L3M58A) ● HP PageWide XL Folder Upgrade Kit for Long Plots (M0V04A) ● HP PageWide XL Drawer (CZ318A) ● HP PageWide XL High-Capacity Stacker (CZ319A) ● HP PageWide XL Top Stacker (CZ320A
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 126
    11 When you need help ● Request support ● Customer Self-Repair ● Service information 120 Chapter 11 When you need help ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 127
    from which you bought the printer. If this is not the case, contact HP Support on the Web: http://www.hp.com/go/pagewidexlseries/ support/. Before calling your support representative, prepare for the call as follows: ● Review the troubleshooting suggestions in this guide. ● Review your software
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 128
    12 Retrieving printer usage information ● Get printer usage and accounting information ● Get usage information ● Get detailed job accounting information 122 Chapter 12 Retrieving printer usage information ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 129
    HP support Color CAD jobs printed on standard paper ◦ Low density image: Between 10% and 50% of pixel coverage printed on standard paper ◦ High density image: Over 50% of pixel coverage printed on standard paper ◦ Premium quality image: Any content type printed on premium paper ENWW Get printer
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 130
    paper used and the total at the top, divided into paper categories or families. Usage can be seen at each level. 124 Chapter 12 Retrieving printer usage information ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 131
    server is password-protected, enter the user name and password required to access it. 10. Specify an email address for the printer, which serves to identify the printer when it sends email messages. In most cases you are recommended to choose an email address already associated with the user name
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 132
    or client. If someone sends a job without providing an account ID, the printer will hold the unidentified job in the queue without printing it until an number of copies, the paper type and size, the amount of each color of ink used and various other attributes of the job. Accounting data are
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 133
    13 Printer specifications ● Functional specifications ● Physical specifications ● Memory specifications ● Power specifications ● Environmental specifications ● Acoustic specifications ● Speed specifications (Lines/Fast mode) ENWW 127
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 134
    Functional specifications Table 13-1 HP ink supplies Printheads Ink cartridges Eight CMYK printheads, each containing 25344 nozzles spaced at 1200 nozzles per (73°F), 50-60% relative humidity, on E/A0 polypropylene in high-detail or uniform-areas mode. 128 Chapter 13 Printer specifications ENWW
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 135
    Table 13-5 Graphic languages supported Printer Languages PostScript PostScript, PDF, TIFF, JPEG Non-PostScript HP-GL/2, PCL 3 Win Physical specifications Table 13-6 Printer physical specifications Width 1960 mm (77.17 in) Depth 800 mm (31.5 in) Depth with basket folded 991 mm (39 in)
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 136
    80% RH, depending on paper type Storage humidity < 90% RH Altitude 0 to 3000 m (10000 ft) Acoustic specifications Table 13-11 Printer acoustic specifications Printing acoustic pressure (printing to basket) Printing acoustic power (printing to basket) Ready acoustic pressure Ready acoustic power
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 137
    and may be able to fix it automatically. If the problem persists after restarting, you should contact your support representative and be ready to give the numerical code from the error message. If the error message contains some other recommended action, follow the printer's instructions. ENWW 131
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 138
    consistency The ability to print the same colors from a particular print job from print to print and from printer to printer. Color model A system of representing colors by numbers, such as RGB or CMYK. Color space A color model in which each color is represented by a specific set of numbers. Many
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 139
    defined by HP to describe vector graphics. I/O Input/Output: this term describes the passing of data between one device and another. ICC The International Color Consortium, a group of companies that have agreed on a common standard for color profiles. Ink cartridge A removable printer component that
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 140
    format into data suitable for a particular printer. Printhead A removable printer component that takes ink of one or more colors from the corresponding ink cartridge(s) and deposits it on the paper, through a cluster of nozzles. Spindle A rod that supports a roll of paper while it is being
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 141
    printer 111 cleaning container 60 color calibration 106 components of printer 7 computer communication printer/computer communications issues 73 connect the printer firmware update 116 manual setup 19 folder 129 help 120 HP Utility access 12 printer 111 N network troubleshooting 72 ENWW Index 135
  • Konica Minolta HP PageWide XL 5000 MFP | User Guide - Page 142
    driver 77 print from USB flash drive 79 print modes 81 print next 85 print quality 104 printer calibration 106 printer software Mac OS X uninstall 18 Windows uninstall 17 printer status 111 printer network settings 70 service information 121 -capacity stacker 112 printer 111 support 120 system errors
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

HP PageWide XL 5000 Printer
User guide