Konica Minolta ProJet 160 Cube3 User Guide - Page 30
NOTE: It may become necessary to rotate the cartridge to seat
View all Konica Minolta ProJet 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
4. Insert the print jet (from the cartridge that will be mounted on the left side of the printer) into the left print jet opening on top of the printer. 5. Rotate the print jet clockwise until the dots (A) align. Select the checkmark to continue. NOTE: As you rotate the print jet, ensure the print jet tube is tucked under the top of the printer cover. A 6. Mount the cartridge on the left side of the printer. Select the checkmark to continue. NOTE: It may become necessary to rotate the cartridge to seat it properly. NOTE: The print jet will begin to heat. Once the print jet has reached the operating temperature, the printer will prime melted material into the refuse bin. 7. The left cartridge has been installed. Select the checkmark to complete the procedure. NOTE: Once the cartridge has been installed, allow the print jet to cool down before continuing. 3D Systems, Inc. 26