Konica Minolta ProJet 160 Cube3 User Guide - Page 84
NOTE: Ensure the jet wiper is fully seated before reinstalling the, purge bin assembly°
View all Konica Minolta ProJet 160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2. Pull the jet wiper (A) upward. A 3. Install the new jet wiper onto the purge bin and reinstall the purge bin assembly into the printer. NOTE: Ensure the jet wiper is fully seated before reinstalling the purge bin assembly. 4. Select the checkmark to confirm the replacement of the jet wiper. 3D Systems, Inc. 80
80
3D Systems, Inc
.
2°
Pull the jet wiper (A) upward°
3°
Install the new jet wiper onto the purge bin and reinstall the purge bin assembly
into the printer°
NOTE: Ensure the jet wiper is fully seated before reinstalling the
purge bin assembly°
4°
Select the
checkmark
to confirm the replacement of the jet wiper.
A