Konica Minolta bizhub C654 bizhub C654/C754 Network Fax Operations User Guide - Page 59
Configuring the fax print settings for the administrator, Fixing the print paper size [Print Paper
View all Konica Minolta bizhub C654 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
3.6 Receiving Options 3 3.6.7 Configuring the fax print settings (for the administrator) Default print settings ([Print Paper Selection]/[Min. Reduction for RX Print]) A received fax is printed according to the following conditions depending on the page size of the fax. A standard-size fax, such as A4, is printed on the same standard size paper as the received fax while being slightly reduced in size (default: 96%). For example, an A3 fax is printed on A3 paper, and a B4 fax on B4 paper, while reducing the print size to 96% respectively. For details on the fax print settings, refer to page 7-19. Tips - For faxes that are longer in the longitudinal direction than the standard size, the optimal paper size is determined based on the width and length of the fax, and printed on paper of the same size. If the optimal size paper is not available, the fax is printed on paper of a similar size. Fixing the print paper size ([Print Paper Size]) You can always print on the specified size of paper irrespective of the paper size of the received fax. If the size of the received fax is different from the specified print paper size, the fax is printed while increasing or reducing the size according to the print paper size. For details on how to configure the settings, refer to page 7-20. bizhub C754/C654 3-13