Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 107

2. Default settings The state that the copier enters at the end of warm-up or when the Reset key is pressed is called the "initial mode". The modes, functions and other settings that are automatically pre-set for the initial mode are called "default settings". These default settings are separated into two categories: "Copy defaults" and "Machine defaults". These default can be changed as desired to suit your copying needs. (1) Copy default settings The following 24 copy default settings can be changed. Change any or all of the settings as desired in order to make the most effective use of your copier. Section 7 COPIER MANAGEMENT Default setting Description 1 Exposure mode Selects between auto exposure (page 4-3) and manual exposure (page 4-3) as the default copy exposure mode at the time power is turned on. Available settings Factory setting Auto / Manual Inch: Manual Metric: AUTO Reference page 7-17 2 Exposure steps Changes the number of exposure steps in the manual exposure mode. 7 steps 13 steps 7 steps 7-17 3 Auto exposure adjustment (color) Changes the overall exposure when using the auto exposure mode for full color copies. 1 - 7 4 (middle setting) 7-17 4 Auto exposure adjustment (b/w) Changes the overall exposure when using the auto exposure mode for black and white copies. * The overall exposure when making mono-color copies can be adjusted here as well. (See page 5-1.) 1 - 7 4 (middle setting) 7-17 5 Mixed original density Adjusts the exposure of the original when the text&photo mode is selected for the image quality (page 4-3). 1 - 7 4 (middle setting) 7-18 6 Text original density Adjusts the exposure of the original when the text mode is selected for the image quality (page 4-3). 1 - 7 4 (middle setting) 7-18 7-12