Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 77
Separation insert mode settings, NOTES
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
19 If you are finished changing the settings for the cover mode, use the M cursor key to select "End". Inch specifications Section 6 FUNCTIONS 23 Use the numeric keys on the keypad to enter the page number(s) that will specify where the separation insert sheets will be inserted. The sheets will then be inserted before the designated page. Inch specifications Metric specifications Metric specifications 20 Press the Enter key. • If you selected "c Cover+Insert" in step 10, go to the next step ("G Separation insert mode settings"). • If you selected "z Cover" in step 10, go directly to step 26. G Separation insert mode settings 21 The "Copy on Insert sheet?" screen will be displayed. Select whether you want to copy onto the separation inserts or not. If you DO want to copy onto the separation inserts, select "Frt copy" ["COPIED"]. Otherwise, select "Blank". Inch specifications Metric specifications NOTE If you selected "x 2-sided" in step 6, be sure not to enter the number of original sheets; enter the total number of pages being copied on the originals. In other words, each original should be counted as 2 pages. 24 If you want to specify a multiple number of separation insert locations, use the O cursor or the P cursor key to move to and highlight a different page # box, and enter another page number with the numeric keys. Continue this procedure until you have entered all of the desired locations (Maximum: 5 locations). Inch specifications NOTES • If you selected "x 2-sided" in step 6 and you want to make the separation inserts into 2-sided copies as well, select "2-sided" ["DUPLEX"] here. • If you selected "z 1-sided" in step 6, "2-sided" ["DUPLEX"] will not be available for selection here. • If "Bypass" is selected under "* Insert tray" on page 7-21, "2-sided" ["DUPLEX"] will not be available for selection here. 22 Press the Enter key. Metric specifications 25 If you are finished with the settings for the separation insert mode, press the Enter key. The message display will return to the "Ready to copy." screen. 26 Set the originals to be copied. 6-30