Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 23

Section 3 PREPARATIONS 1. Loading paper Copy paper can either be loaded into the drawer(s) or set on the multi-bypass tray. (1) Note when adding paper After taking new paper out of its packaging, be sure to fan through them a few times to separate the sheets before loading the paper into a drawer or setting it on the multi-bypass tray. 1 Pull the drawer out toward you as far as it will go. * DO NOT pull more than one drawer out at a time. 2 Open the paper feed unit (shown as 1 in the illustration). (2) Loading paper into a drawer Up to 500 sheets of standard paper (75 g/m2 - 90 g/m2) or color paper can be loaded into the drawer that is included with your copier. Up to 250 sheets of paper can be loaded into each drawer of the optional Paper Feeder. • Standard accessory drawer(s) Standard copier (for 1-sided copies only): Two 500-sheet capacity drawers Duplex copier (for 2-sided copies): One 500-sheet capacity drawer • Acceptable sizes of paper Inch specifications 500-sheet capacity drawers: 11" x 8 1/2", 8 1/2" x 14" and 11" x 17" 250-sheet capacity drawers: 8 1/2" x 11", 11" x 8 1/2", 8 1/2" x 14" and 11" x 17" Metric specifications 500-sheet capacity drawers: A5R, B5R, A4, B4 and A3 250-sheet capacity drawers: A5R, B5R, A4R, A4, B4 and A3 * The 500-sheet capacity drawers will not accept 8 1/2" x 11" [A4R] size paper. * Neither type of drawer will accept 5 1/2" x 8 1/2" or 8 1/2" x 5 1/2" size paper. IMPORTANT! • BE SURE to use paper that is specified for color copy use in order to make clear color copies. • DO NOT use paper such as that designated for inkjet printers or any paper treated with special coating. • Specify the type of paper that is loaded into each drawer (plain, recycled, etc.) under "% Type of paper" on page 7-31. 1 NOTE DO NOT touch the rollers (shown as 2 in the illustration). 2 3-1