Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 88

Section 6 FUNCTIONS 18. Copying different sized originals onto one size of copy paper [Filing mode] With this mode, when you are copying from different sized originals, you need only separate the originals by size group and then scan them all in order to have all of the originals copied onto the same paper size. 2 Use the M cursor or the N cursor key to select "x Filing". Inch specifications Metric specifications NOTES • If you do not have a Memory Copy Board installed as standard equipment, the optional Memory Copy Board must be installed in your copier in order to use this mode. • If your machine is a duplex copier, it is possible for you to make duplex (2-sided) copies in this mode. • Originals can be scanned from both the DF and the platen in combination. 1 Press the Auto Selection/Filing key to light the corresponding indicator. The "Select function" screen will appear. Inch specifications Metric specifications 3 Press the Enter key. 4 Use the M cursor or the N cursor key to specify the type of originals being copied. Select "z 1-sided" if you are using 1-sided originals and "x 2-sided" if you are using 2-sided originals. Inch specifications Metric specifications 5 Press the Enter key. • If your machine is a duplex copier, go to the next step. • If your machine is a standard copier, go directly to step 8. 6 Use the M cursor or the N cursor key to select the type of finished copies you want to make. Select "z 1-sided" if you want to make 1-sided copies and "x 2-sided" if you want to make 2-sided copies. Inch specifications Metric specifications 6-41