Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 53

Section 6 FUNCTIONS 3. Making duplex (2-sided) copies from various types of originals [2-sided copy modes] With these modes, duplex (2-sided) copies can be made from a variety of originals including open-faced (books, etc.) originals or multiple one-sided originals. NOTES • These modes are only available in duplex copiers. • 2-sided copies cannot be made automatically when paper is being fed from the multi-bypass tray. (2) Making duplex (2-sided) copies from an open-faced (books, etc.) original With this mode, the two facing pages of a magazine or book are copied separately onto the front and back sides of the copy paper by simply pressing the Start key. NOTES • The binding direction of the originals can also be selected. (1) Making duplex (2-sided) copies from a 2-sided original With this mode, a 2-sided original is copied and the front and back sides of the copy paper are used so that the copy looks just like the original. NOTES • Only paper sizes between 5 1/2" x 8 1/2" and 11" x 17" [between A5R and A3] can be used in this mode. • The optional DF must be installed in your copier. 1 Left side binding: Open-faced originals are copied from the left side page first. 2 Right side binding: Open-faced originals are copied from the right side page first. • Only 8 1/2" x 11" and 11" x 8 1/2" [B5, A4R and A4] paper sizes can be used in this mode. (A4R paper can be loaded into the optional 2Drawer Paper Storage Unit, while B5 paper can be set onto the multi-bypass tray.) 6-6