Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 93

21. Sorting automatically [Sort mode] Since copying in this mode is performed after multiple originals are scanned and memorized, copies can be sorted into the required number of sets even without the optional Document Finisher. Section 6 FUNCTIONS 3 Enter the number of copy sets that you want to make and press the Start key. • If you set the originals in the optional DF, copying will start automatically. • If you set the original on the platen, go to the next step. Inch specifications Metric specifications NOTES • If you do not have a Memory Copy Board installed as standard equipment, the optional Memory Copy Board must be installed in your copier in order to use this mode. • If "On" is selected under "› Rotate sort ON/OFF" on page 7-23 and the size of the finished copies is set to 11" x 8 1/2" [B5 or A4], the orientation of each set of copies will be changed, thus making each copy set easier to separate. In order to use this setting, there must be 11" x 8 1/2" and 8 1/2" x 11" [B5 and B5R or A4 and A4R] paper set in the drawers. (8 1/2" x 11" and A4R paper can be loaded into the optional Paper Feeder, while B5 paper can be set onto the multibypass tray. However, 2-sided copies cannot be made automatically when paper is being fed from the multi-bypass tray.) 4 Replace the first original with the next one and press the Start key. * Carry out this step for all of the originals that you want to copy. 5 Once all of the originals that you want to copy have been scanned, press the Enter key. Copying will start. Inch specifications Metric specifications 1 Set the original(s) to be copied. 2 Press the Sort key to light the corresponding indicator. Inch specifications Metric specifications 6-46