Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 31
s fixing unit is extremely hot. Take
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 3 PREPARATIONS 6 Operate the paper conveyor release lever and pull the paper conveyor out towards you as far as it will go. WARNING High voltage is present in the charger section. Take sufficient care when working in this area, as there is a danger of electrical shock. CAUTION The copier's fixing unit is extremely hot. Take sufficient care when working in this area, as there is a danger of getting burned. CAUTION DO NOT attempt to incinerate the toner containers or the waste toner tank. Dangerous sparks may cause burns. CAUTION DO NOT attempt to force open or destroy the toner containers or the waste toner tank. 8 Use the cap that is located on top of the waste toner tank to seal to the opening in the tank. 7 Push down on the waste toner tank release lever (shown as 2 in the illustration) and remove the waste toner tank. 9 Insert the old tank into the supplied disposable plastic bag. 2 IMPORTANT! DO NOT turn the waste toner tank upside down after you remove it from the copier. 3-9