Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 54
Making duplex 2-sided copies from one-sided, originals
View all Kyocera KM-C830D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Section 6 FUNCTIONS (3) Making duplex (2-sided) copies from one-sided originals With this mode, multiple one-sided originals are copied onto the front and back sides of the copy paper. If you are copying an odd number of originals, the back side of the last page will be blank. 1 Set the original to be copied. 2 Press the Duplex/Page Separation key to light the corresponding indicator. Inch specifications Metric specifications NOTE The image that is copied onto the back side of the copy can also be rotated 180 degrees. 3 Use the M cursor or the N cursor key to select "z 2-sided copy" and then press the Enter key. The "Select 2-sided copy mode" ["SELECT DUPLEX COPY MODE"] screen will appear. Inch specifications Metric specifications 1 Do not rotate: The back side of the copy will be created with the same orientation as the original. 2 Rotate: The image that is copied onto the back side of the copy will be rotated 180 degree. If you then bind the copy set at the top, the images will be oriented in the same direction when flipped up like a calendar, etc. 4 Use the M cursor or the N cursor key to select the 2-sided copy mode that you want to use. Inch specifications Metric specifications 5 Press the Enter key. • If you selected "z 1-sided to 2-sided" ["z 1-SIDED ORIG. > DUPLEX"], go to the next step. • If you selected "x 2-sided to 2-sided" ["x DUPLEX ORIG. > DUPLEX"], the "2-sided mode" ["DUPLEX MODE"] screen will appear. In this case, go directly to step 10. • If you selected "c Book original", go directly to step 8. 6-7