Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 120

Section 7 COPIER MANAGEMENT Default setting 5 APS for special paper ON/OFF Description Sets whether the paper loaded in the drawer that was selected under "4 Special paper location" on page 7-28 will be used or not in the auto paper selection mode or in automatic drawer switching (page 2-5). Available settings Factory setting Reference page On / Off On 7-29 6 Color copy paper location Sets the location (a drawer or the multi-bypass tray) Standard copiers ----- where paper will be loaded for color copying. When Bypass / you make color copies in the auto paper selection 1 paper [SOURCE 1] - mode, copying will be performed onto paper that is 4 paper [SOURCE 4] loaded in the drawer that you select here. * No.3 and No.4 drawers can only be selected Duplex copiers when the optional Paper Feeder is installed in Bypass / your copier. 2 paper [SOURCE 2] - 4 paper [SOURCE 4] 7-29 7 Auto preheat time Sets the amount of time between the point that copying ends and the energy-saving preheat mode (page 6-47) engages. 5 minutes - 45 minutes 15 minutes (5 minute increments) 7-29 8 Auto shut-off time Sets the amount of time that will elapse if no operation is performed before the auto shut-off function (page 6-48) engages and turns the copier OFF ( ). It is also possible to disable the auto shut-off function. If the auto shut-off function is turned OFF, this setting will not be effective. (See "3 Auto shut-off ON/OFF" on page 7-28.) The factory default time is 30 minutes. * It is recommended that you try to set a longer time interval before auto shut-off engages if you use the copier frequently, and to a shorter time if it is used less frequently. * In order to disable the auto shut-off function, see "3 Auto shut-off ON/OFF" on page 7-28. 15 minutes - 240 minutes (15 minute increments) 30 minutes 7-29 9 Display contrast adjustment Adjusts the contrast of the LCD display if you cannot see the message display clearly. 1 - 7 4 (middle setting) 7-30 7-25