Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 117

) Eject destination 1 Use the M cursor or the N cursor key to select either "z Inner Eject" (copy storage table) or "x Side Eject" (copy eject tray). Inch specifications Metric specifications Section 7 COPIER MANAGEMENT ¤ Auto color adjustment 1 Make sure that there is 11" x 8 1/2" [A4] paper loaded in one of the drawers. 2 Use the M cursor or the N cursor key to select the image quality that you want to adjust the color for. Inch specifications Metric specifications 2 Press the Enter key. ⁄ ACS adjustment 1 Press the O cursor or the P cursor key to move the cursor on the exposure scale. Move the cursor to the right to make black and white copies even if there is a small amount of color in the original, and to the left to have color copies made even if there is a large volume of black and white in the original. Inch specifications 3 Press the Enter key. The "Begin Auto Calibration" ["START AUTO CALIBRATION"] screen will appear. Inch specifications Metric specifications Metric specifications 2 Press the Enter key. 4 Press the Start key. A PG color pattern will be printed out. Inch specifications Metric specifications 7-22