Kyocera KM-C830D KM-C830 Operation Guide Rev-1B - Page 86

Section 6 FUNCTIONS 17. Enlarging the image and printing it out onto multiple sheets [Poster mode] With this mode, if the size of the copy image after enlargement is greater than the size of available copy paper, you can have the copy image split and printed out onto multiple sheets of copy paper. 2 Use the M cursor or the N cursor key to select "c Poster" and then press the Enter key. The "Select input mode" screen will appear. Inch specifications Metric specifications NOTES • If you do not have a Memory Copy Board installed as standard equipment, the optional Memory Copy Board must be installed in your copier in order to use this mode. • As there will be some duplication of a portion of the image on each finished copy, if you overlay these areas you can create a single enlarged image. • Only 11" x 17" [A3] size paper can be used in this mode. • There are two methods of making copies in the poster mode: priority towards a standard magnification ratio between the sizes of the original and the finished copies (Copy size), and priority towards a custom copy size at a desired magnification ratio (Zoom priority). 1 Press the Book Mode key to light the corresponding indicator. Inch specifications Metric specifications 3 Use the M cursor or the N cursor key to select the poster mode method that you want to use. Inch specifications Metric specifications 4 Press the Enter key. • If you selected "z Auto Zoom priority" ["z ZOOM PRIORITY"], go to the next step. • If you selected "x Copy size", go directly to step 9. 5 Specify the size of the original being copied. Inch specifications Metric specifications 6 Press the Enter key. 6-39