Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 200
Loading Paper in the Multipurpose Tray
View all Kyocera TASKalfa 3212i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Operation on the Machine > Loading Paper in the Multipurpose Tray Loading Paper in the Multipurpose Tray For details of the supported paper sizes, refer to the following: Choosing the Appropriate Paper (page 11-13) For the paper type setting, refer to the following: Media Type Setting (page 8-15) Be sure to use the multipurpose tray when you print on any special paper. IMPORTANT • If you are using a paper weight of 106 g/m2 or more, set the media type to Thick and set the weight of the paper you are using. • Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inner tray may cause a paper jam. The capacity of the multipurpose tray is as follows. • A4 or smaller plain paper (80 g/m2), recycled paper or color paper: 100 sheets • Plain paper (80 g/m2), recycled paper or color paper larger than A4: 25 sheets • Thick paper (250 g/m2): 10 sheets • Thick paper (209 g/m2): 10 sheets • Thick paper (157 g/m2): 10 sheets • Thick paper (120 g/m2): 25 sheets • Thick paper (104.7 g/m2): 25 sheets • Hagaki (Cardstock): 20 sheets • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • OHP film: 10 sheet NOTE • When you load custom size paper, enter the paper size by referring to the following: Original / Paper Settings (page 8-11) • When you use special paper such as transparencies or thick paper, select the media type by referring to the following: MP Tray Setting (page 8-8) • Paper size can be automatically detected and selected, refer to the following: Paper Selection (page 6-19) MP Tray Setting (page 8-8) 1 Open the multipurpose tray. 5-6