Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 515

Troubleshooting > Troubleshooting Message Memory is full.*1 Checkpoints - Corrective Actions The memory is full and the job cannot be continued. Select [Continue] to print the scanned pages. The print job cannot be processed completely. Select [Cancel] to cancel the job. When insufficient memory occurred frequently, contact your dealer or service representative. Reference Page - - The process cannot be - performed due to insufficient memory. If only [End] is available, select [End]. The job will be canceled. *1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details on Auto Error Clear, refer to the following: Auto Error Clear (page 8-68) N Message Non-genuine toner installed. Checkpoints Is the installed toner container our own brand? Corrective Actions We will not be liable for any damage caused by the use of third party supplies in this machine. Reference Page - P Message Paper jam. Paper left. Perform Tone Curve Adjustment in the System Menu. Checkpoints ― - - Over long periods of use, the effects of the ambient temperature and humidity can cause output hues to vary slightly. Corrective Actions Reference Page If a paper jam occurs, the machine will stop and the location of the jam will be indicated on the screen. Leave the machine on and follow the instructions to remove the jammed paper. page 10-44 Remove paper from the - document finisher. Remove paper from the finisher - tray. Run [Tone Curve Adjustment]. page 10-41 10-32