Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 291
Punch, Mixed Size Stapling, Original, Orientation, Original Orientation, Top Edge on Top
View all Kyocera TASKalfa 3212i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Using Various Functions > Functions NOTE One position staple is not slanted for the following paper sizes. B5-R, 16K-R Mixed Size Stapling Even with mixed paper sizes, if the sizes have the same width as shown in the combinations below, the output can be stapled. • A3 and A4 • B4 and B5 • Ledger and Letter • Ledger and Letter-R • 8K and 16K A4 A3 B5 B4 Letter Ledger NOTE • Number of sheets that can be stapled: up to 30 sheets. • When performing Mixed Size Stapling, refer to the following: Mixed Size Originals (page 6-20) A4 A3 B5 B4 Letter Ledger Letter-R Legal Punch Punches holes in sets of finished documents. Letter-R Legal NOTE • This function requires the optional Document Finisher and Punch Unit. • For details on paper sizes that can be punched, refer to the following: Punch Unit (For 1,000-Sheet/3,000-Sheet Finisher) (page 11-25) • The inch model provides two-hole and three-hole punching. The metric model provides two-hole and four-hole punching. Item Value Description Punch Off 2 holes Left 2 holes Top 2 holes Right Select the position of punch holes. For details on original orientation and position of punch holes, refer to the following: Original Orientation and Punch Hole Position (page 6-27) 3 holes Left 3 holes Top 3 holes Right 4 holes Left 4 holes Top 4 holes Right Original Orientation Top Edge on Top, Top Edge on Left, Auto*1 Select the orientation of the original document top edge to scan correct direction. Select [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then select [OK]. *1 This function can only be used when the optional OCR Scan Activation Kit is installed. 6-26