Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 429
Lower
View all Kyocera TASKalfa 3212i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 429 highlights
Setup and Registration (System Menu) > System Menu Item Display Brightness Silent Mode Auto Color Correction Tone Curve Adjustment Drum Refresh 1 Drum Refresh 2 Memory Diagnostics Contrast Copy Send/Box Description Set the brightness of the touch panel. Value: 1 (Darker), 2, 3, 4, 5 (Lighter) Set the Silent Mode. Select this mode when the running noise is uncomfortable. Value: Off, On NOTE When [On] is selected, it may take time for the next print job to start. This setting allows you to adjust the detection level used by the machine to determine whether the original is color or black and white in Auto Color Selection Mode. Setting a lower value will result in more originals being identified as color, while a larger value will tend to increase the number of originals being identified as black and white. Value: 1 (Color), 2, 3, 4, 5 (B & W) After prolonged use, or from the effects of surrounding temperature or humidity, the printed output tone may differ from the original. Perform this function to ensure consistency with the original tone. Tone Curve Adjustment (page 10-41) Remove image blur from the printout. It takes about 1 minute. The time required may vary depending on the operating environment. Drum Refresh 1 (page 10-42) NOTE Drum Refresh 1 cannot be performed while printing. Execute Drum Refresh 1 after the printing is done. Remove white dots from the printout. It takes about 80 seconds. To use [Drum Refresh 2], load Ledger or A3 size paper into the Multipurpose tray. When you run [Drum Refresh 2], the machine sometimes makes a vibrating sound for about 80 seconds until drum refreshing is completed. The toner soiling on the ejected paper is normal and does not indicate a fault. Drum Refresh 2 (page 10-43) NOTE Drum Refresh 2 cannot be performed while printing. Execute Drum Refresh 2 after the printing is done. Perform this function to check the machine memory. You can increase or decrease the overall contrast. Increases or decreases the overall contrast of copies. Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher) Increases or decreases the overall contrast when documents are sent or saved in a document box. Value: -3 (Lower), -2, -1, 0 (Normal), +1, +2, +3 (Higher) 8-73