Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 524

Troubleshooting > Adjustment/Maintenance Adjustment/Maintenance Overview of Adjustment/Maintenance If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/ Maintenance in the system menu. The table below lists the item you can carry out. Item Description Reference Page Tone Curve Adjustment When the printed output tone may differ from the original, perform this function to ensure consistency with the original tone. page 10-41 Drum Refresh 1 Remove image blur from the printout. page 10-42 Drum Refresh 2 Remove white spots from the printout. page 10-43 Tone Curve Adjustment After prolonged use, or from the effects of surrounding temperature or humidity, the printed output tone may differ from the original. Perform this function to ensure consistency with the original tone. A total of 2 pattern pages (No. 1 and 2) are printed during adjustment. The printed patterns are read sequentially during the adjustment. 1 Load paper. IMPORTANT • Load the paper with the print side facing up. • After removing new paper from its packaging, fan the paper before loading it in the cassette. Loading in the Cassettes (page 3-4) • Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause paper jams. • Ensure that the loaded paper does not exceed the level indicator (see illustration above). • If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew or become jammed. 2 Display the screen. [System Menu/Counter] key > [Adjustment/Maintenance] > "Tone Curve Adjustment" [Next] 10-41