Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 264

Operation on the Machine > Manual Staple Manual Staple You can staple copied paper manually without any print operation. It is useful when you have forgotten to set the staple sort mode before starting copying, or when you want to staple originals. NOTE • This function requires the optional Document Finisher: 3,000-Sheet Finisher (page 11-25) • If there are no staples when manual stapling is performed, the stapling position lamps and stapling position key LEDs all blink. Add staples. Replacing Staples (3,000-Sheet Finisher) (page 10-11) • Manual stapling cannot be executed when the machine is in operation. Maximum number of sheets available for manual stapling Paper size A4, A4-R, B5, Letter, Letter-R, 16K A3, B4, Folio, Ledger 65 sheets 30 sheets Paper weight 52 - 90 g/m2 (14.0 - 24.0 lb. Bond) Use the keys on the control section of the Finisher (optional) for manual stapling. 1 2 3 1 Stapling position lamps 2 Stapling position key 3 Stapling key / lamp 1 Press the stapling position key on the stapling control section. The shutter of the paper exit area is opened and this equipment enters into the manual staple mode. 2 Set the staple position. Press the stapling position key to select the stapling position (Back / Front / 2 Points ). Operation is not possible while the stapling position lamps are blinking. Operate after the lamps light solidly. 5-70