Kyocera TASKalfa 3212i 3212i/4012i Operation Guide - Page 221

Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP) The table below lists the items to be set. Item Host Name *1 Path*2 Data to be entered Host name or IP address of FTP server Path to the receiving folder For example: User\ScanData Otherwise the data will be saved in the home directory. Max. characters Up to 70 characters Up to 128 characters Login User Name FTP server login user name Up to 64 characters Login Password FTP server login password (Case sensitive.) Up to 64 characters *1 You can also specify the port number. Enter the following format separated by a colon. "Host name: port number" or "IP address: port number" To enter the IPv6 address, enclose the address in brackets [ ]. (Example: [2001:db8:a0b:12f0::10]:21) If the port number is not specified in [Host Name], the default port number is 21. *2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash "/" not using the back-slash. 5 Check the status. 1 Check the information. Change the delay as required. 2 Select [Connection Test] to check the connection. "Connected." appears when connection to the destination is correctly established. If "Cannot connect." appears, review the entry. To enter multiple destinations, select [Next Destination] and enter the next destination. You can register the entered information in the Address Book by selecting [Add Address Book]. NOTE If [Prohibit] is set to "Broadcast", multiple destinations cannot be entered. Broadcast (page 8-34) 6 Select [OK]. Destinations can be changed later. Confirmation Screen of Destinations (page 5-44) 7 Select the functions. Select tabs to display other functions. Send (page 6-5) 8 Press the [Start] key. Sending starts. 5-27