Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 155

ProSafe Managed Switch show ip dhcp snooping Use this command to display the DHCP Snooping global configurations and per port configurations. Format Mode show ip dhcp snooping • Privileged EXEC • User EXEC Term Definition Interface The interface for which data is displayed. Trusted If it is enabled, DHCP snooping considers the port as trusted. The factory default is disabled. Log Invalid Pkts If it is enabled, DHCP snooping application logs invalid packets on the specified interface. Example: The following shows example CLI display output for the command. (switch) #show ip dhcp snooping DHCP snooping is Disabled DHCP snooping source MAC verification is enabled DHCP snooping is enabled on the following VLANs: 11 - 30, 40 Interface --------0/1 0/2 0/3 0/4 0/6 Trusted -------- Yes No No No No Log Invalid Pkts No Yes Yes No No show ip dhcp snooping binding Use this command to display the DHCP Snooping binding entries. To restrict the output, use the following options: • Dynamic: Restrict the output based on DCHP snooping. • Interface: Restrict the output based on a specific interface. • Static: Restrict the output based on static entries. • VLAN: Restrict the output based on VLAN. Format Mode show ip dhcp snooping binding [{static/dynamic}] [interface unit/slot/port] [vlan id] • Privileged EXEC • User EXEC Switching Commands 155