Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 369
show ip igmp-proxy interface
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 369 highlights
ProSafe Managed Switch Term Definition Number of Multicast Groups The number of multicast groups that are associated with the IGMP Proxy interface. Unsolicited Report Interval The time interval at which the IGMP Proxy interface sends unsolicited group membership report. Querier IP Address on Proxy Interface The IP address of the Querier, if any, in the network attached to the upstream interface (IGMP-Proxy interface). Older Version 1 Querier Timeout The interval used to timeout the older version 1 queriers. Older Version 2 Querier Timeout The interval used to timeout the older version 2 queriers. Proxy Start Frequency The number of times the IGMP Proxy has been stopped and started. Example: The following example shows CLI display output for the command. (Switch) #show ip igmp-proxy Interface Index 1/0/1 Admin Mode Enable Operational Mode Enable Version 3 Num of Multicast Groups 0 Unsolicited Report Interval 1 Querier IP Address on Proxy Interface........ 5.5.5.50 Older Version 1 Querier Timeout 0 Older Version 2 Querier Timeout 00::00:00 Proxy Start Frequency 1 show ip igmp-proxy interface This command displays a detailed list of the host interface status parameters. It displays the following parameters only when you enable IGMP Proxy. Format Modes show ip igmp-proxy interface • Privileged EXEC • User EXEC Term Definition Interface Index The unit/slot/port of the IGMP proxy. The column headings of the table associated with the interface are as follows: IP Multicast Commands 369