Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 573
sntp client port, sntp unicast client poll-interval
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 573 highlights
ProSafe Managed Switch no sntp client mode This command disables Simple Network Time Protocol (SNTP) client mode. Format Mode no sntp client mode Global Config sntp client port This command sets the SNTP client port id to a value from 1-65535. Default Format Mode 123 sntp client port Global Config no sntp client port This command resets the SNTP client port back to its default value. Format Mode no sntp client port Global Config sntp unicast client poll-interval This command sets the poll interval for SNTP unicast clients in seconds as a power of two where can be a value from 6 to 10. Default Format Mode 6 sntp unicast client poll-interval Global Config no sntp unicast client poll-interval This command resets the poll interval for SNTP unicast clients to its default value. Format Mode no sntp unicast client poll-interval Global Config sntp unicast client poll-timeout This command will set the poll timeout for SNTP unicast clients in seconds to a value from 1-30. Default 5 Utility Commands 573