Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 29

ProSafe Managed Switch show supported switchtype This commands displays information about all supported switch types or a specific switch type. Format Modes show supported switchtype [] • User EXEC • Privileged EXEC If you do not supply a value for , the following output appears: Term Definition Switch Index (SID) The index into the database of supported switch types. This index is used when preconfiguring a member to be added to the stack. Model Identifier The model identifier for the supported switch type. Management Preference The management preference value of the switch type. Code Version The code load target identifier of the switch type. If you supply a value for , the following output appears: Term Switch Type Model Identifier Switch Description Definition The 32-bit numeric switch type for the supported switch. The model identifier for the supported switch type. The description for the supported switch type. Stacking Commands This section describes the commands you use to view and configure stacking information. stack-port This command sets stacking per port to either stack or ethernet mode. Default Format Mode stack stack-port [{ethernet | stack}] Stack Global Config Stacking Commands 29