Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 633

ProSafe Managed Switch udld port This command selects the UDLD mode operating on this interface. If the keyword "aggressive" is not entered, the port operates in normal mode. Default Format Mode normal udld port [aggressive] Interface Config udld reset This command resets all interfaces that have been shutdown by UDLD. Format Mode udld reset Privileged EXEC show udld This command displays the global settings of UDLD. Format Mode show udld Privileged EXEC Term Definition Admin Mode The global administrative mode of UDLD. Message Interval The time period (in seconds) between the transmission of UDLD probe packets. Timeout Interval The time period (in seconds) before making decision that link is unidirectional. show udld This command displays the UDLD settings for the specified . If the "all" keyword is entered, it displays information for all ports. Format Mode show udld {< unit/slot/port> | all } • Privileged EXEC • User EXEC Term Unit/Slot/Port Admin Mode Definition The identifying of the interface. The administrative mode of UDLD configured on this interface. This is either "Enabled" or "Disabled". Utility Commands 633