Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 227

ProSafe Managed Switch show isdp interface This command displays ISDP settings for the specified interface. Format Mode show isdp interface {all | } Privileged EXEC Term Mode Definition ISDP mode enabled/disabled status for the interface(s). show isdp entry This command displays ISDP entries. If the device id is specified, then only entries for that device are shown. Format Mode show isdp entry {all | deviceid} Privileged EXEC Term Device ID IP Addresses Platform Interface Port ID Hold Time Version Advertisement Version Capability Definition The device ID associated with the neighbor which advertised the information. The IP address(es) associated with the neighbor. The hardware platform advertised by the neighbor. The interface (slot/port) on which the neighbor's advertisement was received. The port ID of the interface from which the neighbor sent the advertisement. The hold time advertised by the neighbor. The software version that the neighbor is running. The version of the advertisement packet received from the neighbor. ISDP Functional Capabilities advertised by the neighbor. show isdp neighbors This command displays the list of neighboring devices. Format Mode show isdp neighbors [ { | detail} ] Privileged EXEC Switching Commands 227