Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 454

ProSafe Managed Switch Field Description Query Max Response Time Indicates the configured maximum query response time (in seconds) advertised in MLD queries on this interface. Robustness Displays the configured value for the tuning for the expected packet loss on a subnet attached to the interface. Startup Query interval This valued indicates the configured interval between General Queries sent by a Querier on startup. Startup Query Count This value indicates the configured number of Queries sent out on startup, separated by the Startup Query Interval. Last Member This value indicates the configured Maximum Response Time inserted into Query Interval Group-Specific Queries sent in response to Leave Group messages. Last Member Query Count This value indicates the configured number of Group-Specific Queries sent before the router assumes that there are no local members. The following information is displayed if the operational mode of the MLD interface is enabled. Field Description Querier Status This value indicates whether the interface is an MLD querier or non-querier on the subnet it is associated with. Querier Address The IP address of the MLD querier on the subnet the interface is associated with. Querier Up Time Time elapsed in seconds since the querier state has been updated. Querier Expiry Time Time left in seconds before the Querier loses its title as querier. Wrong Version Indicates the number of queries received whose MLD version does not match the MLD Queries version of the interface. Number of Joins The number of times a group membership has been added on this interface. Number of Leaves The number of times a group membership has been removed on this interface. Number of Groups The current number of membership entries for this interface. show ipv6 mld traffic Use this command to display MLD statistical information for the router. Format Mode show ipv6 mld traffic • Privileged EXEC • User EXEC IPv6 Multicast Commands 454