Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 355

ProSafe Managed Switch is the group address supported by the RP. The parameter is the group mask for the group address. The optional keyword override indicates that if there is a conflict, the RP configured with this command prevails over the RP learned by BSR. Default Format Mode disabled ip pim rp-address [override] Global Config no ip pim rp-address This command is used to statically remove the RP address for one or more multicast groups. Format Mode no ip pim rp-address [override] Global Config ip pim rp-candidate This command is used to configure the router to advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap router (BSR). Format Mode ip pim rp-candidate interface {interval } Global Config Parameter Description interface-num The IP address associated with this interface type and number is advertised as a candidate RP address. This interface must be enabled with PIM. group-address, group-mask The multicast group address and prefix that are advertised in association with the RP address. interval (Optional) Indicates the RP candidate advertisement interval. The range is from 1 to 16383 seconds. The default is 60 seconds. no ip pim rp-candidate This command is used to disable the router to advertise itself as a PIM candidate rendezvous point (RP) to the bootstrap router (BSR). Format Mode no ip pim rp-candidate interface Global Config IP Multicast Commands 355