Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 481

ProSafe Managed Switch Note: The CLI mode is changed to Policy-Class-Map Config when this command is successfully executed. Format Mode class Policy-Map Config no class This command deletes the instance of a particular class and its defined treatment from the specified policy. is the names of an existing DiffServ class. Note: This command removes the reference to the class definition for the specified policy. Format Mode no class Policy-Map Config mark cos This command marks all packets for the associated traffic stream with the specified class of service value in the priority field of the 802.1p header (the only tag in a single tagged packet or the first or outer 802.1Q tag of a double VLAN tagged packet). If the packet does not already contain this header, one is inserted. The CoS value is an integer from 0 to 7. Default Format Mode Incompatibilities 1 mark-cos Policy-Class-Map Config Drop, Mark IP DSCP, IP Precedence, Police mark cos-as-sec-cos This command marks outer VLAN tag priority bits of all packets as the inner VLAN tag priority, marking CoS as Secondary CoS. This essentially means that the inner VLAN tag CoS is copied to the outer VLAN tag CoS. Format mark-cos-as-sec-cos Quality of Service (QoS) Commands 481