Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 33
initiate failover, command also transfers control from the current management unit; however
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
ProSafe Managed Switch Term Definition Time Since Last Copy When the running configuration was last copied from the management unit to the backup unit. Time Until Next Copy The number of seconds until the running configuration will be copied to the backup unit. This line only appears when the running configuration on the backup unit is Stale. NSF Support (Per Unit Whether a unit supports NSF. Status Parameters) Example: (Switch)#show nsf Administrative Status Enable Operational Status Enable Last Startup Reason Warm Auto-Restart Time Since Last Restart 0 days 16 hrs 52 mins 55 secs Restart In Progress No Warm Restart Ready Yes Copy of Running Configuration to Backup Unit: Status Stale Time Since Last Copy 0 days 4 hrs 53 mins 22 secs Time Until Next Copy 28 seconds Unit NSF Support 1 Yes 2 Yes 3 Yes initiate failover Use this command to force the backup unit to take over as the management unit and perform a "warm restart" of the stack. On a warm restart, the backup unit becomes the management unit without clearing its hardware tables (on a cold restart, hardware tables are cleared). Applications apply checkpointed data from the former management unit. The original management unit reboots. If the system is not ready for a warm restart, for example because no backup unit has been elected or one or more members of the stack do not support nonstop forwarding, the command fails with a warning message. The movemanagement command also transfers control from the current management unit; however, the hardware is cleared and all units reinitialize. Note: Use this command instead of movemanagement if you expect nsf during management unit changes. Format Mode initiate failover Stack Global Config Mode Stacking Commands 33