Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 480

ProSafe Managed Switch mirror This command specifies that all incoming packets for the associated traffic stream are copied to a specific egress interface (physical port or LAG). Format Mode Incompatibilities mirror Policy-Class-Map Config Drop, Redirect redirect This command specifies that all incoming packets for the associated traffic stream are redirected to a specific egress interface (physical port or port-channel). Format Mode Incompatibilities redirect Policy-Class-Map Config Drop, Mirror conform-color Use this command to enable color-aware traffic policing and define the conform-color class map. Used in conjunction with the police command where the fields for the conform level are specified. The parameter is the name of an existing DiffServ class map. Note: This command may only be used after specifying a police command for the policy-class instance. Format Mode conform-color Policy-Class-Map Config class This command creates an instance of a class definition within the specified policy for the purpose of defining treatment of the traffic class through subsequent policy attribute statements. The is the name of an existing DiffServ class. Note: This command causes the specified policy to create a reference to the class definition. Quality of Service (QoS) Commands 480