Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 98
dot1x max-req, no dot1x mac-auth-bypass
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
ProSafe Managed Switch no dot1x mac-auth-bypass This command disables MAB for 802.1x-unaware clients. Format Mode no dot1x mac-auth-bypass Interface Config dot1x max-req This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. The value must be in the range 1 - 10. Default Format Mode 2 dot1x max-req Interface Config no dot1x max-req This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. Format Mode no dot1x max-req Interface Config dot1x max-users Use this command to set the maximum number of clients supported on the port when MAC-based dot1x authentication is enabled on the port. The maximum users supported per port is dependent on the product. The value is in the range 1 - 48. Default Format Mode 48 dot1x max-users Interface Config no dot1x max-users This command resets the maximum number of clients allowed per port to its default value. Format Mode no dot1x max-req Interface Config Switching Commands 98