Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 294

ProSafe Managed Switch no default-information originate (OSPF) This command is used to control the advertisement of default routes. Format Mode no default-information originate [metric] [metric-type] Router OSPF Config default-metric (OSPF) This command is used to set a default for the metric of distributed routes. Format Mode default-metric Router OSPF Config no default-metric (OSPF) This command is used to set a default for the metric of distributed routes. Format Mode no default-metric Router OSPF Config distance ospf (OSPF) This command sets the route preference value of OSPF in the router. Lower route preference values are preferred when determining the best route. The type of OSPF route can be intra, inter, or external. All the external type routes are given the same preference value. The range of value is 1 to 255. Default Format Mode 110 distance ospf {intra-area | inter-area | external } Router OSPF Config no distance ospf This command sets the default route preference value of OSPF routes in the router. The type of OSPF can be intra, inter, or external. All the external type routes are given the same preference value. Format Mode no distance ospf {intra-area | inter-area | external} Router OSPF Config Routing Commands 294