Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 471

ProSafe Managed Switch Note: The class-map-name default is reserved and must not be used. The class type of match-all indicates all of the individual match conditions must be true for a packet to be considered a member of the class. This command may be used without specifying a class type to enter the Class-Map Config mode for an existing DiffServ class. Note: The optional keywords [{ipv4 | ipv6}] specify the Layer 3 protocol for this class. If not specified, this parameter defaults to ipv4. This maintains backward compatibility for configurations defined on systems before IPv6 match items were supported. Note: The CLI mode is changed to Class-Map Config or Ipv6-Class-Map Config when this command is successfully executed depending on the [{ipv4 | ipv6}] keyword specified. Format Mode class-map match-all [{ipv4 | ipv6}] Global Config no class-map This command eliminates an existing DiffServ class. The is the name of an existing DiffServ class. (The class name 'default' is reserved and is not allowed here.) This command may be issued at any time; if the class is currently referenced by one or more policies or by any other class, the delete action fails. Format Mode no class-map Global Config class-map rename This command changes the name of a DiffServ class. The is the name of an existing DiffServ class. The parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class. Default Format Mode none class-map rename Global Config Quality of Service (QoS) Commands 471