Netgear M5300-28G3 Command Line Interface (CLI) User Manual - Page 226

ProSafe Managed Switch clear isdp counters This command clears ISDP counters. Format Mode clear isdp counters Privileged EXEC clear isdp table This command clears entries in the ISDP table. Format Mode clear isdp table Privileged EXEC show isdp This command displays global ISDP settings. Format Mode show isdp Privileged EXEC Term Definition Timer The frequency with which this device sends ISDP packets. This value is given in seconds. Hold Time The length of time the receiving device should save information sent by this device. This value is given in seconds. Version 2 Advertisements The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted. Device ID The Device ID advertised by this device. The format of this Device ID is characterized by the value of the Device ID Format object. Device ID Format Capability Indicates the Device ID format capability of the device. • serialNumber indicates that the device uses a serial number as the format for its Device ID. • macAddress indicates that the device uses a Layer 2 MAC address as the format for its Device ID. • other indicates that the device uses its platform-specific format as the format for its Device ID. Device ID Format Indicates the Device ID format of the device. • serialNumber indicates that the value is in the form of an ASCII string containing the device serial number. • macAddress indicates that the value is in the form of a Layer 2 MAC address. • other indicates that the value is in the form of a platform specific ASCII string containing info that identifies the device. For example, ASCII string contains serialNumber appended/prepended with system name. Switching Commands 226