Netgear XCM8806 Chassis User Manual - Page 188

NETGEAR 8800 User Manual show inline-power stats slot The command provides the following information: • Firmware status-Displays the firmware state: • Operational • Not operational • Disabled • Subsystem failure • Card not present • Slot disabled • Firmware revision-Displays the revision number of the PoE firmware • Total ports powered-Displays the number of ports powered on specified slot • Total ports awaiting power-Displays the number of remaining ports in the slot that are not powered • Total ports faulted-Displays the number of ports in a fault state • Total ports disabled-Displays the number of ports in a disabled state Displaying Port PoE Information You can display the PoE configuration, status, and statistics per port. Displaying Port PoE Configuration To display PoE configuration for each port, use the following command: show inline-power configuration ports This command provides the following information: • Config-Indicates whether the port is enabled to provide inline power: • Enabled: The port can provide inline power. • Disabled: The port cannot provide inline power. • Operator Limit-Displays the configured limit, in milliwatts, for inline power on the port. • Label-Displays a text string, if any, associated with the port (15 characters maximum). Displaying Port PoE Status To display the PoE status per port, use the following command: show inline-power info {detail} ports This command provides the following information: • State-Displays the port power state: • Disabled • Searching 188 | Chapter 7. PoE