Netgear XCM8806 Chassis User Manual - Page 499

NETGEAR 8800 User Manual 4. Configure the edge switches as described in this guide. 5. Configure each supplicant as described in Configuring a Windows XP Supplicant for 802.1x Authentication on page 503. For complete instructions on setting up an LDAP server, see the product documentation for the LDAP server. This section provides examples and guidelines for the following tasks: • Installing OpenLDAP on page 499 • Configuring OpenLDAP on page 500 • Configuring slapd for Startup on page 500 • Adding New Schemas on page 500 • Populating LDAP Database with Organization and User Entries on page 500 • Restarting the LDAP Server on page 501 • LDAP Configuration Example on page 501 Installing OpenLDAP OpenLDAP software is an open source implementation of Lightweight Directory Access Protocol and can be obtained from the site: http://www.openldap.org. To install OpenLDAP packages: 1. Verify the Red Hat Linux installed releases. The release number is stored in the /etc/redhat-release file. 2. Verify the version of OpenLDAP currently installed by entering the command rpm -qa | grep openldap at the Linux prompt. # rpm -qa |grep openldap openldap-2.3.xx-x openldap-clients-2.3.xx-x openldap-servers-2.3.xx-x 3. If you have a default Red Hat Linux installation, there is at least one OpenLDAP Red Hat Package Manager (RPM) installed. The LDAP RPMs can be found on the Red Hat CD or downloaded from one of the following RPM download sources: • www.rpmfind.net and search for openldap and select the RPM based on the distribution • www.redhat.com and select Download, and then search for openldap 4. After downloading the RPMs to the Linux server, change to the download directory and start the installation using the rpm command: # rpm -ivh openldap* 5. Verify that the OpenLDAP RPMs have been installed with the rpm -qa | grep openldap command at the Linux prompt. # rpm -qa | grep openldap openldap-2.3.xx-x openldap-clients-2.3.xx-x openldap-servers-2.3.xx-x Chapter 17. Security | 499