Netgear XCM8806 Chassis User Manual - Page 512

NETGEAR 8800 User Manual scp2 engineering.cfg admin@system1:engineering.cfg Using SFTP from an External SSH2 Client The SFTP protocol is supported for transferring configuration, and policy files to the switch from the SFTP client. You must have administrator-level access to the switch. The switch can be specified by its switch name or IP address. XCM8800 requires that SFTP transfer to the switch files named as follows: • *.cfg-XCM8800 configuration files • *.pol-XCM8800 policy files • *.xos-XCM8800 core image file • *.xmod-XCM8800 modular package file • *.ssh-Public key files In the following examples, you are using a Linux system to move files to and from the switch at 192.168.0.120, using the switch administrator account admin. You are logged into your Linux system as account user. To transfer the primary configuration file from the switch to your current Linux directory using SCP2, use the following command: [user@linux-server]# sftp [email protected] password: sftp> put primary.cfg To copy the policy filename test.pol from your Linux system to the switch, use the following command: [user@linux-server]# sftp [email protected] password: sftp> put test.pol To copy the image file test.xos from your Linux system to the switch, use the following command: [user@linux-server]# sftp [email protected] password: sftp> put test.xos To copy the SSH image file test-ssh.xmod from your Linux system to the switch, use the following command: [user@linux-server]# sftp [email protected] password: sftp> put test-ssh.xmod To load the public keyed_rsa.pub from your Linux system to the switch, use the following command: 512 | Chapter 17. Security