Netgear XCM8806 Chassis User Manual - Page 237

NETGEAR 8800 User Manual Event Actions The actions that you can define for each alarm are shown in Table 29. Table 29. Event Actions Action no action High Threshold log log-and-trap Sends a log message. Sends both a log message and a trap to all trap receivers. snmp-trap Sends a trap to all trap receivers. To be notified of events using SNMP traps, you must configure one or more trap receivers, as described in the section, Using the Simple Network Management Protocol on page 76. Displaying RMON Information To view the status of RMON polling on the switch (the enable/disable state for RMON polling), use the following command: show management To view the RMON memory usage statistics for a specific RMON feature (for example, statistics, events, logs, history, or alarms) or for all features, use the following command: show rmon memory {detail | } SMON SMON is the common abbreviation for the Switch Network Monitoring Management Information Base (MIB) system defined by the Internet Engineering Task Force (IETF) document RFC 2613. SMON is a set of MIB extensions for RMON that allows monitoring of switching equipment from a SNMP Manager in greater detail. The supported MIB tables are described in Appendix D, Supported Protocols, MIBs, and Standards; smonPrioStatsControlTable and smonPrioStatsTable cannot be supported due to hardware limitations. Note: When you delete all the mirroring filters through the portCopyConfigTable, the mirroring is disabled automatically. Chapter 8. Status Monitoring and Statistics | 237