Netgear XCM8806 Chassis User Manual - Page 316

NETGEAR 8800 User Manual To view both System Space and User Space zones, use the show access-list zone command. Table 33 shows the priority of System Space zones and User Space zones together with the default assignments and priority of applications by zone. Table 33. Default Assignment and Priority of Applications, by Zone Zone/Default Application Default Priority USER SPACE ZONES DOS 2 hal 1 Dos 2 SYSTEM 3 Cli 1 IpSecurity 2 NetLogin 3 HealthCheckLAG 4 IdentityManager 5 SECURITY 4 Sentriant 1 GenericXml (Allows configuration 2 of one additional external application) Note: The priority of static ACLs is determined by the order they are configured, with the first rule configured having the highest priority. Configuring User Zones There is a configurable process for applications to insert an ACL into a zone according to the priority of the application within that zone. Applications can occupy multiple zones. For example, you can add the Cli application to the DOS zone, and assign it a higher priority than the Dos application. The DOS zone then has two applications, Cli and Dos application, and within the DOS zone, an ACL created by the Cli has a higher priority than an ACL inserted by the Dos application. Another way to configure ACL priority is by creating new zones. For example, you might create a zone called MY_HIGH_ZONE, and assign that zone a priority below the DOS zone 316 | Chapter 13. ACLs