Netgear XCM8806 Chassis User Manual - Page 665

NETGEAR 8800 User Manual OSPF AS Backbone Area 0.0.0.0 ABR Area 121.2.3.4 ASBR ASBR RIP AS EX_046 Figure 70. Route Redistribution Configuring Route Redistribution Exporting routes from one protocol to another and from that protocol to the first one are discrete configuration functions. For example, to run OSPF and RIP simultaneously, you must first configure both protocols and then verify the independent operation of each. Then you can configure the routes to export from OSPF to RIP and the routes to export from RIP to OSPF. Likewise, for any other combinations of protocols, you must separately configure each to export routes to the other. Redistributing Routes into RIP Enable or disable the exporting of static, direct, BGP-learned, and OSPF-learned routes into the RIP domain using the following commands: enable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | static] [cost {tag } | policy ] disable rip export [bgp | direct | e-bgp | i-bgp | ospf | ospf-extern1 | ospf-extern2 | ospf-inter | ospf-intra | static] These commands enable or disable the exporting of static, direct, and OSPF-learned routes into the RIP domain. You can choose which types of OSPF routes are injected, or you can simply choose ospf, which will inject all learned OSPF routes regardless of type. The default setting is disabled. Chapter 22. RIP | 665