Netgear XCM8806 Chassis User Manual - Page 80

NETGEAR 8800 User Manual • Read community strings provide read-only access to the switch. The default read-only community string is public. • Read-write community strings provide read- and-write access to the switch. The default read-write community string is private. • System contact (optional)-The system contact is a text field that enables you to enter the name of the person(s) responsible for managing the switch. • System name (optional)-The system name enables you to enter a name that you have assigned to this switch. The default name is the model name of the switch (for example, XCM8806-1.2). • System location (optional)-Using the system location field, you can enter the location of the switch. Displaying SNMP Settings To display the SNMP settings configured on the switch, use the following command: show management This command displays the following information: • Enable/disable state for Telnet and SNMP access • Login statistics • Enable/disable state for idle timeouts • Maximum number of CLI sessions • SNMP community strings • SNMP trap receiver list • SNMP trap receiver source IP address • SNMP statistics counter • SSH access states of enabled, disabled, and module not loaded • CLI configuration logging • SNMP access states of v1, v2c disabled and v3 enabled • Enable/disable state for Remote Monitoring (RMON) • Access-profile usage configured via Access Control Lists (ACLs) for additional Telnet and SSH2 security • CLI scripting settings • Enable/disable state • Error message setting • Persistence mode • Dropped SNMP packet counter. 80 | Chapter 3. Managing the Switch