Netgear XCM8806 Chassis User Manual - Page 199

NETGEAR 8800 User Manual the switch fabric and ports offline when you use the run diagnostics [extended | normal | stack-port] {slot [ | A | B]} command. After the diagnostic routine has finished, use the enable slot command to bring the module back online and operational. Observing LED Behavior During a Diagnostic Test Whether you run a diagnostic test on an I/O module or MSM/MM, LED activity occurs during and immediately following the test. The LED behavior described in this section relates only to the behavior associated with a diagnostic test. For more detailed information about all of the I/O module, MSM/MM, and switch LEDs, see the hardware documentation listed in Related Publications on page 24. I/O Module LED Behavior Table 23 describes the NETGEAR 8800 series switch I/O module LED behavior during a diagnostic test. Table 23. NETGEAR 8800 Series Switch I/O Module LED Behavior LED Color Indicates DIAG Amber blinking Amber Green Diagnostic test in progress. Diagnostic failure has occurred. Diagnostic test has passed. Stat Amber blinking Configuration error, code version error, diagnostic failure, or other severe module error. Off Diagnostic test in progress, or diagnostic failure has occurred. After the I/O module completes the diagnostic test, or the diagnostic test is terminated, the DIAG and the Status LEDs are reset. During normal operation, the DIAG LED is off and the Status LED blinks green. MSM LED Behavior This section describes the MSM behavior during a diagnostic test. LED behavior during a diagnostict test on the primary MSM Table 24 describes the NETGEAR 8800 series switch XCM88S1 LED behavior during a diagnostic test on the primary MSM. Chapter 8. Status Monitoring and Statistics | 199