Panasonic VB42050 VB42050 User Guide - Page 102
System Hold, Considerations, Description, Operation
View all Panasonic VB42050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Key Telephone Features Call Hold • FF1 (System): Key Bank Hold • FF1 (System): Non-Appearing Trunk Hold Considerations • When using an outside line for which there is no line key on your extension, press the HOLD key to place the call on hold, and then press a vacant line key. Release the held call by pressing HOLD again. (System programming determines whether the call will be placed on Exclusive Trunk Hold or System Trunk Hold.) • A held call will recall if it is not retrieved before the Hold Recall Timer expires. "Hold Recall #XX" (where "XX" is the outside line number) appears on the display if a call has been held beyond the time limit. • If you press the HOLD key during a conference with two outside lines, both outside lines will be placed on hold. • If your system is set for onhook transfer and you have placed an outside call on hold, and you then make an Intercom Call, make sure the other extension hangs up before you do. If you hang up before the other extension, the held outside line will be transferred to that extension. (Pressing FLASH releases the extension.) • The DBS 824 can provide music-on-hold to callers placed on hold. See "Music-On-Hold" (page 1-24) for more information. System Hold Description Operation Using System Hold, you can place either an outside call or an Intercom Call on hold. A call placed on System Hold can be retrieved from any extension. To place a call on System Hold: Press the HOLD key. • The line LED being used for the call flashes green. Revised April 2000 DBS 824-3.0/3.2-700 3-15