Panasonic VB42050 VB42050 User Guide - Page 139

Line Appearances Key Telephone Features Operation Operation To originate a trunk call To place a call on Exclusive Trunk Hold (page 3-29) To place a call on System Trunk Hold (page 3-15) To transfer a call Action Press an idle MCO key. The key blinks (green) as the call is made. Press the MCO key. Press the HOLD key. Press HOLD, dial the destination extension, then press PROG. Related Programming • FF1 (System): Least Cost Routing (LCR) Access • FF2 (Trunks): Pooled Trunk Access for Group "9" • FF2 (Trunks): Pooled Trunk Access for Groups "81-86" • FF3 (Extension): Forced Least Cost Routing • FF4 (Ringing): Ringing and Hunt Groups (all) • FF5 (Keys): FF Key Assignments (all) • FF8 (LCR) LCR Settings (all) Considerations • When all trunks in a group are busy, all of the corresponding MCO keys light red. • If LCR is enabled, MCO keys can be assigned for trunk group 89. However, the FF keys will not light. • Trunk lines flash red.. • There are seven groups of outside lines: 9 and 81-86. • Press the MCO key that flashes green to answer an outside call. • If there are multiple outside calls, lift the receiver (or ON/OFF) to speak to the first one. If more than one call comes in from an extension, then the second receives busy tone. 3-52 DBS 824-3.0/3.2-700 Revised April 2000