Panasonic VB42050 VB42050 User Guide - Page 25

Auto Set Relocation System Features • When one auto mode is turned on, the mode cannot be reset by the DAY/ NIGHT1/NIGHT2, NIGHT key or NIGHT2 key until 3 minutes after the auto mode is activated. (When both auto modes are set, the mode keys cannot be used.) • If mode keys are not assigned, the access codes #520 (DAY/NIGHT1/ NIGHT2 toggle), #521 (Day), #522 (Night1) and #523 (Night2) can be used instead. Auto Set Relocation (CPC-S and CPC-M) Description Auto Set Relocation can be used to relocate the program settings of one extension to another extension. Auto Set Relocation is commonly used when extension users want to trade work areas. For example, if Extensions "A" and "B" are going to switch office locations, Auto Set Relocation enables them to switch telephone settings without re-programming. Operation Before a phone can be relocated, it must be assigned an Auto Set Relocation code. See "Related Programming" for the program address used to set up the Auto Set Relocation Code. The following example illustrates how the program settings for extensions 200 and 300 could be switched. To Transfer Extension Settings from 200 to 300: 1. At extension 200, pick up the handset. 2. Press "#10." 3. Dial extension number 300. 4. Enter the four-digit auto set relocation code assigned to extension 300. 5. Replace the handset. • All programmed extension features, TRS, and LCR settings from 200 are transferred to 300. 1-8 DBS 824-3.0/3.2-700 Revised April 2000